Amiko Mira2 wifi
Brand: Amiko
Rating : Not Rated till now ! - Rate the product now or check reviews from customers
Plug version (if using)
| Price per unit: | |
|---|---|
| Total price: Price is excluding VAT ! |
$ 38,28 |
| Check Shipping price |
Set up Watch Dog on this item here.
Interested in this product ?
AMIKO MIRA 2 WIFI
New range of popular cheap satellite receivers Amiko Mira 2 with built-in Wifi, external IR sensor and Conax card reader.
Amiko MIRA 2 Wifi has improved HW, the new processor is clocked at 650Mhz.
It has one USB port for connecting USB devices such as. USB Flash key, or USB HDD for multimedia playback, or recording of favorite programs, or using PVR functions such as timed recording or timeshift.
It has a built-in Wifi antenna, so you can connect to the Internet wirelessly. Ethernet cable connection is not possible. It can also be connected to older TVs with SCART connector. It also supports connection to an AV receiver via coaxial SPDIF output, which also supports bistream of the multi-channel Dolby Digital audio format. The advantage is the small size and the possibility of hiding in the cabinet or behind the TV. Possibility of connecting an external IR sensor, which you will find in the package. The receiver does not support the new H.265 HEVC code.
Main features :
- High Speed USB 2.0 Connection Support
- SCART support
- External infra port
- Built in WiFi
- TimeShifting Support
- Software Upgrade via USB
- MKV, AVI, MPG, MP4, TS, VOB, JPEG & MP3
- Playback Support
- Software Upgrade via USB
- Dolby Digital Bit-Stream out via HD OUT
- Low Power Consumption in Stand
System Resources :
- Main Processor: Dual Core 650MHz
- Flash Memory: 64MBits
- DDR RAM: 1024Mbits
A/V & Data Input/Output :
- SCART: CVBS Video out / Audio L/R out
- USB: One USB 2.0 slot
- S/PDIF: Coaxial
- Digital Video Output
- IR Port: Internal & Jack Type
Tuner & Demodulation :
- Tuner Type: DVB-S / DVB-S2
- Input Connector: F-type, Connector, Female
- Signal Level: -65 to -25 dBm
- LNB Power & Polarization: Vertical: +13V/+14V,
- Horizontal: +18V/+19V
- Current: Max. 400mA
- Overload Protection
- 22KHz Tone Frequency: 22±1KHz
- DiSEqC Control: Version 1.0, 1.1, 1.2, USALS
- Demodulation: QPSK, 8PSK
- Input Symbol Rate: 2-45 Mbps,
- FEC: 1/2, 2/3, 3/4, 5/6, 7/8 and Auto
Included in package :
- receiver Amiko mira2 wifi
- Ir sensor
- power supply
- remote control
- battery
- short manual
Shipping worldwide , 2 years warranty
